Climatic Chambers

Fratelli Galli presents Climatic Test Chambers for Environmental Simulation: precise reproduction of Temperature, Hot, Cold, Thermal Shock, Humidity, Saturation, Dry, Solar Radiation, UV, Xenon, Corrosive Environment, Salt Spray, SO2, Pressure, Vacuum, Nitrogen, Argon, VOCs, Vibrations, Dust, Powder, Water Spillage,…


Climatic Chamber

Volumes: 115 and 205L
Range: Amb.T. +5,0°C to +90,0°C and from 20% to 96% RH


Climatic Chamber

Volumes: 120, 290, 610 and 930L
Range: from -10,0°C to 120,0°C

and from 20% to 96% RH


Genviro Compact
Climatic Chamber

Volumes: 30, 60, 120 e 245L
Range: from -40/-70°C to +180°C and from 10% to 98% RH


Genviro Large
Climatic Chamber

Volumes: from 300 to 3.000L
Range: from -40/-70°C to +180°C and from 10% to 98% RH


Genviro-SL Thermal Cryogenic Chamber

Volume: 60 L
Temperature Range

from -140°C to +180°C


GTestBox Thermostatic
and Climatic Chamber

Volumes: 260 and 400L
Range: from +15,0°C to +25,0°C and from 40% to 60% RH

Galli-Camera Climatica-Climatic Chamber-Gtest

GTest Thermostatic and
Climatic Chamber

Volumes: 580 and 750L
Range: from 0°C to +60°C

and from 20% to 96% RH

Galli-Camera Climatica-Climatic Chamber-Gtest Light

GTest Light
Climatic Chamber

Volumes: 900 and 1400L
Range: from 0°C to +60,0°C
and from 20% to 90% RH

Galli-Thermotron-Camera Climatica-climatic Chamber-SE

SE Environmental
Test Chamber

Volumes: from 300 to 3300L
Range: from -40/-70°C to +180°C and from 10% to 98% RH

Galli-Cella Climatica Accessibile-Accesible Climatic Chamber-GWalkin

GWalkin Modular Accessible Chamber

Volumes 5, 10, 15, 30 and 40L
Temperature and RH% control
Lights control

GIPTEST 340XX Galli Cella Prove IPx3 IPx4

IP Water Spray Test Chamber

For IPX3 and IPX4 Degrees
In Compliance with
IEC/DIN/EN 60529/60068 2-18

GIPTEST 560XX Galli Cella Prove IP5X IP6X

IP Dust Penetration Test Chamber

For IP5X and IP6X Degrees
In Compliance with
IEC/DIN/EN 60529

GIPTEST 700XX Galli Vasca Prove IPx7

IP Water Immersion
Test Tank

For IPX7 Degree
In Compliance with
IEC/DIN/EN 60529


Tension Test Chamber

Range: Amb.T. to +300°C,
from -40/-70°C to +180°C and
from -160°C to +200°C 10/96 RH%


Humidity Test Chamber

Volume: 300L
Horizontal Forced Ventilation
Constant temperature


Ghygrocell SO2 Kesternich Tests Chamber

Volume: 300L
Constant or cyclic temperature
RH% Saturation

Galli-Thermotron-Camera Climatica-climatic Chamber-ATSS-30

Thermal Shock Model ATSS-30

Hot Zone from +25°C to +215°C
Cold Zone from -73°C to +180°C

RH% Control: 10/96%

Galli-Thermotron-Camera Climatica-climatic Chamber-ATS Shock Termico-Thermal Shock

Classic Thermal Shock ATS Model

2 or 3 zones
Range: from -73°C to +200°C
and from 10% to 96% RH

Galli-Thermotron-Altitude Test Chambers

Altitude Test Chamber

Altitude Test Chamber
with variable temperature
and humidity values

Galli-Thermotron-AVI Instrument Test Tools

AVI Instrument Test Tools

Instrument Test Tools
Analog Voltage Input
32 Channels

Galli-Thermotron-AVIO Instrument Test Tools

AVIO Instrument Test Tools

Instrument Test Tools
Analog Voltage Input/Output
16 Channel

What is a climatic chamber?

Certainly it is a precise test ambient  where you can control many parameters like: temperature, heat, cold, humidity, saturation, dry, solar irradiation, UV, Xenon, corrosive Environment, salt, SO2, pressure, vacuum, nitrogen, argon, VOC.

But how thermal , climatic and humidity test chamber works?

In terms of temperature climatic chambers normally use electric heaters to increase temperature and refrigeration systems to reduce the temperature, refrigeration systems can be mechanical,  liquid cooling or themoelectric based system. To introduce humidity, evaporation, steam generators and hultrasonic sistems rare utilised. However, to remove humidity, mechanical dehumidifying system are used, and other system to reach a lower relative humidity like air dryers can be added. To create and control other environmetal parameters special system are designed and applied.

Even more products to be tested according to standards can find the right simulation and stress environment among our standard models, or in the design and realization of “made-to-measure” costom models.

So Galli offers Chambers with a few liters of capacity up to large volumes and accessible Walk-in rooms. The temperature can vary from -70 ° C to + 180 ° C or from -150 ° C to + 300 ° C for the special versions, the humidification systems we manage, include both direct and indirect systems without aerosol. Irradiation, dust, rain, salt spray and cyclic tests are some of the possible specialties. Main applications: automotive, electrical, semiconductor, construction, chemical, pharmaceutical, biotechnology, aeronautics and defense, solar energy, home automation.

First of all the Galli Environmental Test Chamber allows to carry out tests from simple and very complex thermostatic and / or climatic profiles, managing the recording of the performance of environmental parameters; such as temperature and relative humidity. At Galli we offer solutions that combine the Environmental Chambers with recorders that comply with the ICH Pharmacopoeia Standards; with inviolable data according to safety protocols CFR, 11. Furthermore, a Thermostatic Test Chamber or a Climatic Test Chamber can be designed to comply with the regulations of other technologically advanced sectors such as the Aeronautical, Space, Military and Electronic sectors. For example, the AMS2750E standard can be met.

How to calibrate climatic chamber?

All Galli Thermostatic and Climatic Test Chambers can be supplied with an official ACCREDIA calibration report or with an original Factory report, always with international ACCREDIA and LAT references. Furthermore regular calibrations can be done by the user or by Galli technical support team.

At Galli, we have climatic chamber for sale, but more we have solution for you. In fact, when you select a Climatic Chamber many variables can influence the choice. For example: size, range of temperature, range of relative humidity,  speed performance, type of test to be performed, product under test, space for installation, power, cooling system.

Specials? Customization?

Do your products need to be tested according to specific standards? Do you need a specific solution for your specific test? Fratelli Galli offers standard models and specials, bespoke and tailor-made models according to your needs.

At Galli you will find a professional support helping you to choose the best.