Fratelli Galli presents Climatic Test Chambers for Environmental Simulation: precise reproduction of Temperature, Hot, Cold, Thermal Shock, Humidity, Saturation, Dry, Solar Radiation, UV, Xenon, Corrosive Environment, Salt Spray, SO2, Pressure, Vacuum, Nitrogen, Argon, VOCs, Vibrations, Dust, Powder, Water Spillage,…
Climatic Chamber from 300 to 3300L, from -40/-70 to +180°C with Relative Humidity Control 10/98 RH% Gradients °C/min Extra Quick
For IPX3 and IPX4 Degrees
In Compliance with
IEC/DIN/EN 60529/60068 2-18
For IP5X and IP6X Degrees
In Compliance with
What is climatic chamber?
Certainly it is a precise test ambient where you can control many parameters like: temperature, heat, cold, humidity, saturation, dry, solar irradiation, UV, Xenon, corrosive Environment, salt, SO2, pressure, vacuum, nitrogen, argon, VOC.
In terms of temperature climatic chambers normally use electric heaters to increase temperature and refrigeration systems to reduce the temperature, refrigeration systems can be mechanical, liquid cooling or themoelectric based system. To introduce humidity, evaporation, steam generators and hultrasonic sistems rare utilised. However, to remove humidity, mechanical dehumidifying system are used, and other system to reach a lower relative humidity like air dryers can be added. To create and control other environmetal parameters special system are designed and applied.
Even more products to be tested according to standards can find the right simulation and stress environment among our standard models, or in the design and realization of „made-to-measure“ costom models.
So Galli offers Chambers with a few liters of capacity up to large volumes and accessible Walk-in rooms. The temperature can vary from -70 ° C to + 180 ° C or from -150 ° C to + 300 ° C for the special versions, the humidification systems we manage, include both direct and indirect systems without aerosol. Irradiation, dust, rain, salt spray and cyclic tests are some of the possible specialties. Main applications: automotive, electrical, semiconductor, construction, chemical, pharmaceutical, biotechnology, aeronautics and defense, solar energy, home automation.
First of all the Galli Environmental Test Chamber allows to carry out tests from simple and very complex thermostatic and / or climatic profiles, managing the recording of the performance of environmental parameters; such as temperature and relative humidity. At Galli we offer solutions that combine the Environmental Chambers with recorders that comply with the ICH Pharmacopoeia Standards; with inviolable data according to safety protocols CFR, 11. Furthermore, a Thermostatic Test Chamber or a Climatic Test Chamber can be designed to comply with the regulations of other technologically advanced sectors such as the Aeronautical, Space, Military and Electronic sectors. For example, the AMS2750E standard can be met.
All Galli Thermostatic and Climatic Test Chambers can be supplied with an official ACCREDIA calibration report or with an original Factory report, always with international ACCREDIA and LAT references. Furthermore regular calibrations can be done by the user or by Galli technical support team.
At Galli, we have climatic chamber for sale, but more we have solution for you. In fact, when you select a Climatic Chamber many variables can influence the choice. For example: size, range of temperature, range of relative humidity, speed performance, type of test to be performed, product under test, space for installation, power, cooling system.
Do your products need to be tested according to specific standards? Do you need a specific solution for your specific test? Fratelli Galli offers standard models and specials, bespoke and tailor-made models according to your needs.
At Galli you will find a professional support helping you to choose the best.