GIPTEST-560 Dust Penetration Test Chamber

In Compliance with IEC/CEI EN 60529 for IP5X- IP6X protection degrees

 Main Features

• Internal Chamber Dimensions 1000x1000x1000 mm WxDxH 
• Door with Gaskets and Inspection Window
• Lower collecting hopper
• Compartment for circulation pump
• Vibrating Hopper system to avoid talc deposits
• Talc circulation system by means of radial fan
• Aspiration from the lower part with introduction in the upper part
• Deflector of powder distribution
• Internal socket outlet for specimen connection
• Pre-heating system for internal moisture removal
• Internal/external pressure compensator filter
• Internal upper tracks complete with sliding hooks
• General Switch
• Programmer for cycle timer 24h
• Test cycle selector “Manual –Automatic”
• Selector for internal socket
• Switch for intermittence electrical outlet
• Control switch for fans
• Selector for heating insertion
• Signalling and control lights
• Power supply 400V 3P+N 50hz
• Installed power 1 kW
• Noise exceeding 80 decibels, with vibrator inserted
• External dimensions approx 1160x1080x1960mm WxDxH

Standard Equipment

• 25 kg of talc HM4
• Instruction Manual
• Talc particle size certificate
• Warranty Certificate
• CE Certificate of Conformity

Vacuum-group for the specimen

• Instrument holder structure in powder-coated steel
• Vacuometer for specimen internal vacuum measurements – double scale 40 mbar
• Additional vacuometer with calibration certificate issued by the manufacturer
• Flowmeter for checking the air flowed from the specimen having the following characteristics:
  • Minimum flow rate: 40 Lt/h
  • Maximum flow rate: 10 mc/h
  • Maximum working pressure: 0,5 Bar
  • Calibration certificate issued by the manufacturer
• Filter for instrument protection
• Vacuum pump with inverter for the regulation of the vacuum
• Digital safety pressure switch in case of over-depression

   

Dust Sieve

• Square mesh with diameter of 200 mm
• Nominal distance between wires 5 μm

   

IP5K and IP6K Testing System

• 6-second air/dust movement with pause every 15 minutes
• Adjustable by PLC
• In compliance with ISO/SIN 40050-1 and SAE J 575

Brochure