TC10 - Bagno-Circolatore

General The TC10 can both be used as circulator or ba th.  The bathfluid is heated via a microprocessor controlled heating element. When working below  ambient temperature cooling fluid can be circulated through the cooling coil to lower the bath  temperature.    The bath is equipped with fluid level detection and drain located at the backside of the apparatus. The  microprocessor controlled heating with autotune function guarantees precise temperature controll.     The top unit can easily be detached from the bath  when unscrewing two small handweels located at the  back. This enables full and easy acces to the bath  compartment for cleaning. Span  The bath temperature can be set to a maximum of 250oC(482oF) in steps of 0,1degree. The overall  system accuracy is +-0,05oK

Safety The bath conforms to CE regulation. It further is  equiped with multiple safety features in order to guarantee safe around the clock operation. A  mechanical safety thermostat protects the bath against high temperatures and will automatically  reset itself after switching the bath off and on again.T he safety thermostat can be set between

ambient and +300oC. In case of overtemperature powerelectronics and motor  are fully switched off. The pump motor is protected against mechanical overload via a  resettable fuse. Temperature readout  Standard available in oC, on request in oF. Pump  A pump provides bath circulation or via an external circuit. The pump pressure is 300 mBar   and maximum flow is 7 ltrs per minute with no counterpressure.  Accessories - Leveling platform